Status Led (Mfc-J625Dw Only); Basic Operations - Brother MFC-J625DW Basic User's Manual

Status LED (MFC-J625DW
only)
When you turn the machine on, the status
LED lights up.
When the memory card or USB Flash
memory drive is being read or written to, the
status LED blinks.
When the machine is in Sleep Mode, the
status LED will be off.

Basic Operations

To operate the screen use your finger to
press the Menu or option button directly on
the screen. To display and access all the
screen menus or options in a setting, press
s or t to scroll through them.
IMPORTANT
DO NOT press the screen with a sharp
object, such as a pen or stylus. It may
damage the machine.
The following steps show how to change a
setting in the machine. In this example the
Receive mode setting is changed from
Fax Only to Fax/Tel.
a
Press Menu.
b
Press s or t to display
Initial Setup.
1
c
Press Initial Setup.
d
Press s or t to display
Receive Mode.
e
Press Receive Mode.
f
Press s or t to display Fax/Tel.
g
1
Press Fax/Tel.
Note
Press to go back to the previous level.
h
Press Stop/Exit.
General information
9
1