Brother MFC-J625DW Basic User's Manual page 77

f
Gently push the back of the ink cartridge
marked "PUSH" until it clicks, and then
close the ink cartridge cover.
g
The machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, for
example Black, the screen may ask you to
verify that it was a brand new one (for
example, Did You Change
For each new cartridge you installed,
press Yes to automatically reset the ink
dot counter for that color. If the ink
cartridge you installed is not a brand new
one, be sure to press No.
• If the screen shows No Ink Cartridge
or Cannot Detect after you install the
ink cartridges, check that the ink
cartridges are installed properly.
• DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
• DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
• If you mix the colors by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
• Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
• DO NOT dismantle or tamper with the ink
Black).
cartridge; this can cause the ink to leak out
of the cartridge.
Routine maintenance
IMPORTANT
A
63