Using The Scanner Glass - Brother MFC-J625DW Basic User's Manual

d
Place your document, face down, top
edge first in the ADF underneath the
guides until the screen shows
ADF Ready and you feel it touch the
feed rollers.
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
e
After using the ADF, fold down the
Document Support Flap and close the
ADF Document Support. Push down on
the upper-left portion of the ADF to close
it completely.

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length: Up to 11.7 in. (297 mm)
Width: Up to 8.5 in. (215.9 mm)
Weight: Up to 4.4 lb (2 kg)
How to load documents
Note
To use the scanner glass, the ADF must
be empty. (MFC-J625DW only)
a
Lift the document cover.
b
Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
3
3
c
Close the document cover.
Loading documents
3
27
3