Configuration In Ad-Hoc Mode; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-9840CDW Network User's Manual

Configuration in Ad-hoc mode

®
For Mac OS X 10.2.4 or greater
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
a
Turn on the machine by plugging in the power cord.
b
Press Menu, 7, 2, 6. Using a or b, choose On and press OK.
72.WLAN
6.WLAN Enable
a
On
b
Off
Select ab or OK
c
Turn on your Macintosh
d
Put the supplied CD-ROM into your CD-ROM drive.
e
Double-click the Utilities icon and then Wireless Device Setup Wizard.
®
.
Wireless Configuration for Macintosh
®
5
5
5
70