Brother MFC-9840CDW Network User's Manual page 66
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9840CDW:
- User manual (263 pages) ,
- Quick setup manual (53 pages) ,
- Service manual (491 pages)
Table of Contents
Advertisement
r
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel.
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
s
To communicate with the configured wireless device, you must configure your computer to use same
wireless settings. Manually change the wireless settings on your computer to match the machine's
wireless settings shown on this screen. Click Next.
(The settings shown on this screen are for example only. Your settings will not be the same.)
Wireless configuration for Windows
®
4
56
Advertisement
Table of Contents
Troubleshooting
