Brother MFC-9840CDW Network User's Manual page 70
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9840CDW:
- User manual (263 pages) ,
- Quick setup manual (53 pages) ,
- Service manual (491 pages)
Table of Contents
Advertisement
h
For configuration, it is recommended that you temporarily connect your Brother wireless device directly
to a free port on your access point, hub or router using a network cable.
If you can temporarily connect with a network cable:
Choose I'm able to temporarily connect my device to my access point with a network cable
and then click Next.
Go to f.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your
access point:
Choose I'm not able to connect my device to my access point with a network cable and then
click Next.
Go to j.
i
Connect the Brother wireless device to your access point using a network cable and click Next. Go to m
Wireless Configuration for Macintosh
®
5
60
Advertisement
Table of Contents
Troubleshooting
