Other Sources Of Information - Brother MFC-9840CDW Network User's Manual

g
Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer on the network.
h
Continue through the wizard clicking Finish when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
For Windows Vista™:
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
®
For Windows XP and Windows Server
Click the Start button and choose Printers and Faxes windows.
®
For Windows 2000.
Click the Start button and choose Settings and then Printers.
b
Right click on the printer driver you wish to configure, and then choose Properties.
c
Click the Ports tab and click Add Port.
d
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.

Other sources of information

See Configuring your machine for a network with an Ethernet cable connection on page 12 and Configuring
your machine for a wireless network on page 20 to learn how to configure the IP address of the printer.
Network printing from Windows
®
2003:
®
: basic TCP/IP Peer-to-Peer printing
8
8
8
112