Brother MFC-9840CDW Network User's Manual page 83

k
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match machine's default settings shown on this screen. Click Next.
l
The following list appears. If the list is blank, check if the machine is powered on, and then click Refresh.
Choose the machine you wish to configure, and click Next.
Note
The default node name of the NC-xxxx (where "xxxx" is your model name) is "BRWxxxxxx" (where "xxxxxx"
is the last six digits of Ethernet address).
m
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
If no Ad-hoc wireless networks are available, you need to create a new wireless network. Go to o.
Wireless Configuration for Macintosh
®
5
73