Brother MFC-9840CDW Network User's Manual page 108

Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs Also See for MFC-9840CDW:
Table of Contents

Advertisement

Size Limit
Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent
and an error report will be printed. The document you are sending should be separated into smaller
documents that will be accepted by the mail server. (For your information, a 42 page document based on the
ITU-T Test Chart #1 test chart is approximately 1 Mbyte in size.)
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Setup IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Size Limit.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Notification
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
when the I-Fax has been received.
This feature only works on I-Fax machines that support the "MDN" specification.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Setup IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Notification.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Control panel setup
6
6
6
98

Advertisement

Table of Contents
loading

This manual is also suitable for:

9840cdw - color laser - all-in-one

Table of Contents