Brother MFC-9120CN User Manual page 161

Error Message
Registration
Rename the File
(MFC-9320CW only)
Replace Belt
Replace Drums
1
Replace Drum(X)
Replace Fuser
Replace PF Kit
Cause
Registration failed.
There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
It is time to replace the belt unit.
It is time to replace the drum
units.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the drum unit
for the indicated color.
It is time to replace the fuser unit. Call Brother Customer Service or a Brother
It is time to replace the paper
feeding kit.
Troubleshooting and routine maintenance
Action
Press Black Start or Color Start and try
again.
Do one of the following:
Turn off the machine's power switch.
Wait a few seconds, then turn it on again.
Try Manual Registration, Menu, 4, 7.
(See Manual Registration on page 165.)
Put in a new belt unit. (See Replacing the
belt unit on page 178.)
If the problem continues, call Brother
Customer Service.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Replace the belt unit. (See Replacing the
belt unit on page 178.)
Replace the drum units.
(See Replacing the drum units on page 174.)
Reset the drum unit counter.
(See Resetting the drum counter
on page 178.)
Replace the drum unit for the color indicated
on the LCD.
(See Replacing the drum units on page 174.)
Authorized Service Center to replace the
fuser unit.
To replace Fuser Unit call Brother Customer
Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
1-877-BROTHER (in Canada)
or to locate a Brother Authorized Service
Center, visit us at:
http://www.brother-usa.com/service/
Call Brother Customer Service or a Brother
Authorized Service Center to replace the
PF Kit.
To replace PF Kit call Brother Customer
Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
1-877-BROTHER (in Canada)
or to locate a Brother Authorized Service
Center, visit us at:
http://www.brother-usa.com/service/
C
145