Scanning (For Usb Cable Users); Using The Scan Key; Scan To Usb (Mfc-9320Cw Only) - Brother MFC-9010CN Software User's Manual

11

Scanning (For USB cable users)

Using the Scan key

Note
If you use the Scan key when connected to a network, see Network Scanning on page 184.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your PC.
Before you can use
connect the machine to your PC. If you installed the MFL-Pro Suite from the included CD-ROM then the
correct drivers and ControlCenter3 or ControlCenter2 are installed. Scanning by
configuration on Device Button tab of ControlCenter3 or ControlCenter2. (See SCAN on page 60.) For
details about how to configure the scan settings of the ControlCenter3 or ControlCenter2 buttons and to
launch the application of your choice using
ControlCenter2 on page 156.

Scan to USB (MFC-9320CW only)

You can scan black & white and color documents directly to a USB Flash memory drive. Black and white
documents will be stored in the TIFF (*.TIF), PDF (*.PDF) or Secure PDF (*.PDF) file formats. Color
documents may be stored in JPEG (*.JPG), PDF (*.PDF), Secure PDF (*.PDF) or XPS (*.XPS) file formats.
The default File names are based on the current date. You can change the color, quality and file name.
Resolution
Color 100 dpi
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpi
a
Put a USB Flash memory drive into your machine.
b
Load your document.
c
Press (Scan).
(Scan) on the control panel, you have to install the Brother MFL-Pro suite and
(Scan), see Using ControlCenter3 on page 57 or Using
File Format Options
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / JPEG / XPS
PDF / Secure PDF / TIFF
PDF / Secure PDF / TIFF
11
11
(Scan) follows the
11
11
177