Scanning (For Usb Cable Users); Using The Scan Key - Brother MFC 7460DN User Manual

12

Scanning (For USB cable users)

Using the Scan key

Note
If you use the SCAN key when connected to a network, see Network Scanning on page 195.
You can use (SCAN) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your computer.
Before you can use
connect the machine to your computer. If you installed the MFL-Pro Suite from the included CD-ROM then
the correct drivers and ControlCenter4 or ControlCenter2 are installed. Scanning from the
button follows the configuration of the Device Scan Settings screen of ControlCenter4 or Device Button tab
of ControlCenter2. (For Windows
Configuring Scan button settings on page 84 for Advanced Mode. For Macintosh, see SCAN on page 168.)
For details about how to configure the scan settings of ControlCenter4 or ControlCenter2 buttons and to
launch the application of your choice using
on page 166.
(SCAN) on the control panel, you have to install the Brother MFL-Pro Suite and
®
, see Configuring Scan button settings on page 71 for Home Mode or
(SCAN), see ControlCenter4 on page 61 or ControlCenter2
12
12
(SCAN)
12
190