12
Scanning (For USB cable users)
Using the Scan key
Note
If you use the SCAN key when connected to a network, see Network Scanning on page 201.
You can use
(SCAN) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your computer.
Before you can use
connect the machine to your computer. If you installed the MFL-Pro Suite from the included CD-ROM then
the correct drivers and ControlCenter4 or ControlCenter2 are installed. Scanning by
the configuration on the Device Scan Settings screen of ControlCenter4 or Device Button tab of
ControlCenter2. (For Windows
Configuring Scan button settings on page 88 for Advanced Mode. For Macintosh, see SCAN on page 173.)
For details about how to configure the scan settings of ControlCenter4 or ControlCenter2 buttons and to
launch the application of your choice using
on page 171.
(SCAN) on the control panel, you have to install the Brother MFL-Pro Suite and
®
, see Configuring Scan button settings on page 75 for Home Mode or
(SCAN), see ControlCenter4 on page 63 or ControlCenter2
12
12
(SCAN) follows
12
196