Using The Br-Script3 Driver (Postscript ® 3™ Language Emulation Printer Driver) - Brother MFC-9010CN Software User's Manual
Brother mfc-9010cn: install guide
Hide thumbs
Also See for MFC-9010CN:
- User manual (148 pages) ,
- Quick start manual (28 pages) ,
- Technical specifications (6 pages)
Table of Contents
Advertisement
Printing and Faxing
Using the BR-Script3 Driver
®
(PostScript
3™ language emulation printer driver)
Note
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the
control panel before connecting the interface cable. (See Printer Emulation Support on page 110.)
• The BR-Script3 printer driver does not support the PC-Fax Sending.
• For network users, see the Network User's Guide for installation steps.
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable and Mac OS, only one printer driver for a machine can be registered in
Printer Setup Utility (Mac OS X 10.3.9 to 10.4.x) or Print & Fax in System Preferences (Mac OS X
10.5.x). If a Brother Laser driver is already listed in the Printer list, you will need to remove it and then install
the BR-Script3 printer driver. For the information about removing the printer driver, see Removing the
Printer driver for Macintosh on page 124.
(Mac OS X 10.3.9 to 10.4.x)
a
Choose Applications from the Go menu.
b
Open the Utilities folder.
7
7
125
Advertisement
Table of Contents
