Features Menu; Language Menu - Daewoo DLP-20J1 Instruction Manual

See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 20, HOW TO USE THE SUB-MENUS)
1. When switched to ON:
Prevents the use of the TV set with-
out remote control
2. Wake up function
This function is only selectable
when the clock is set. The TV set
turns on from stand-by at the
WAKE TIME with the programme
entered on the WAKE PROG. line.
Put the TV set on stand-by with the
remote control.
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter
the time manually.
Note : If you turn off the set with
the main power button, the clock
setting is lost. An automatic
attempt is made to set the clock
again at power on.
5. This function is only selectable
when the default picture format is
currently active (see also FORMAT
SELECTION, AUTO setting, page
19). This selects the default format
to be used only when the format
selected with the ZOOM button
(A15) is AUTO, and no picture
format signalling data is received.
6. LANGUAGE menu entry.
- Select the preferred LANGUAGE by use of the CUR-
SOR LEFT (A7), RIGHT (A20) buttons, and the CURSOR
UP (A6) or DOWN (A21) buttons.
- Press the OK button (A18) to confirm the selection
(the choice will be highlighted in red).
Note: The languages shown are subject to modifica-
tion without prior notice.

Features Menu

FEATURES
CHILD LOCK
WAKE TIME
WAKE PROG.
CLOCK
CLOCK PROG.
ZOOM AUTO FULL SCREEN
LANGUAGE
Position ON/OFF
Previous

Language Menu

25
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by
indicator flashes red and green to
indicate the CHILD LOCK is set.
- The front panel TV buttons (B2, B3,
B4) become inactive and the TV will
only respond to the remote control.
2. Switch the WAKE UP function OFF
or 'ON' (the time will be shown
e.g. 07:15) with the remote control
CURSOR LEFT (A7) /RIGHT (A20)
buttons
- Enter the wake up time with the
remote control 0...9 NUMBER
(A3) buttons.
OFF 3. Adjust TV turn-on program number.
OFF
01
4. Adjust TV clock. Clock will start
- - : - -
at 0 seconds upon entry of the
01
4th figure.
The prog. no. which can be used
GB
to automatically seize the time at
turn on can be entered here.
5. Choose your preferred default
format with the remote control
CURSOR LEFT (A7) /RIGHT (A20)
buttons.
Note : For 4:3 TVs FULL SCREEN is
6. The currently selected LANGUAGE
is displayed. Press the OK button
(A18) to access the menu and
change the selection.
LANGUAGE
BG CZ D
F FIN GB
I N NL
RO RUS S
Position
Previous
represented by 4:3. For 16:9
TVs FULL SCREEN is repre-
sented by 16:9.
DK E
GR H
P PL
Position
Confirm
GB