Preparation
AERIAL CONNECTION WITH VCR
Connect your
aerial cable to the RF(aerial) IN terminal on the VCR.
Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with
NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR
channel on programme number "ZERO"using the "Manual tuning" function (See
page 23).
Now you can watch the VCR in TV mode by selecting the programme number "PR00" .
Aerial
terminal
DLP-20D7
RF OUT
VCR
RF IN
DLP-20J1
DLP-20W2
12
RF cable.