Picture Control; Sleep Function - Daewoo DLP-20J1 Instruction Manual

Sound effects
A SPATIAL sound effect is available, using the remote control 3D (A13) button.
The following display appears:
To return to initial sound effect, press
again the 3D (A13) button.
The following display appears:
As an option, the sound effects PANORAMA and Dolby Virtual are available with the same
button. For other adjustments such as BALANCE, EQUALIZER or AVL(option), use the SOUND
menu (page 21).
Manufactured under license from Dolby Laboratories, "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
You can select three pictures settings, by using the remote control NORMAL
button (A17) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS,
NOISE REDUCTION, use the PICTURE menu. If an NTSC signal is received,
then the TINT adjustment will also be available.
01 BBC1
NORMAL I
18:30
The set will turn off (to stand-by
mode) after a period of time that you
can select. By repeated use of the re-
mote control SLEEP button (A4), you
can enter one of the following settings :
OFF 20 min 40 min
Daily Use

Picture Control

01 BBC1
NORMAL II
18:30

Sleep Function

01
60 min 80 min
SPATIAL
STEREO
18:30
OFF
STEREO
18:30
01
BBC1
STEREO
20
100 min 120 min
18
Spatial sound effect
Sound transmission mode
Clock
No sound effect
Sound transmission mode
Clock
BBC1
FAVOURITE
18:30
Remaining time (minutes)
before TV set switches off
OFF