Start Up; Language Menu; Automatic Tuning - Daewoo DLP-20J1 Instruction Manual

The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its
purpose is to enable you to select the language that will be used for all the OSD (On Screen
Display) menus. The user must enter a choice of language before proceeding further.
The language entered at this stage can still be modified at any later time, by entering the
LANGUAGE menu (accessed from the FEATURES menu: see later section under MENU DE-
SCRIPTION).
The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Hol-
land etc).
LANGUAGE
BG CZ D
F FIN GB
I N NL
RO RUS S
Position
Previous
Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keys
and CURSOR RIGHT (A20) / LEFT (A7) keys.
Once you are satisfied with your selection, push the OK button (A18) to confirm your choice.
The choice will briefly highlight in red, after which the menu will disappear.
Note: The languages shown are subject to modification without prior notice.
Automatic Tuning System
If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack
(C1), you must power on the demodulator and tune Sky News before starting ATSS .
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select "ATSS" function.
- Adjust to the required country.
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase "Please Wait !" appears (in red characters ) in
the help instructions box, below the Install menu. At this point release the OK button.
When the ATSS function is finished, the stored programs are displayed on screen using Edit
menu presentation (to Exit tuning before automatic tuning is finished, press the remote con-
trol MENU button (A19).

Language Menu

DK E
GR H
P PL
Position
Confirm

Automatic Tuning

Start Up

15
GB