Program Selection (From 0 To 99); Sound Control - Daewoo DLP-20J1 Instruction Manual

Direct selection
Use the remote control NUMBER 0...9 buttons (A3).
For two digits program numbers, enter the second digit within 2 seconds.
Up / Down selection
Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel
PROGRAM UP / DOWN buttons (B2).
TV volume adjustment
Use the remote control VOLUME UP (A20) / DOW
(A7) buttons or the TV set front panel VOLUME UP /
DOWN buttons (B3).
Headphone volume adjustment
You can access directly to headphone volume
menu, pressing OK button of remote control and
adjust volume using LEFT/RIGHT button.
Remark: also you can adjust headphone volume level by
selecting Sound Menu (see page 21)
Mute
Mute the sound by pressing the remote control SOUND
MUTE button (A2).
Then, logo
is displayed. The previous sound setting is
returned after pressing the same button a second time.
If a sound related function is used (e.g. VOLUME, 3D) then
the MUTE will also be cancelled.
Mono forcing, dual language
- If you are unable to get good sound quality for a program due to poor
reception, you can force a change from stereo to mono transmission by
pressing the remote control MODE button (A14). Then the program status
display will indicate "MONO" with a
- On the other hand, during a program with dual language transmission,
the MODE button (A14) allows you to toggle between the first and sec-
ond language. The program status display will indicate "DUAL 1" or "DUAL
2" (plus NICAM according to the received signal).
- To return to initial state, press again the MODE button (A14).

Program Selection (From 0 to 99)

Sound Control

icon.
Daily Use
17
PR
GB