Menus Description
ded in the transmission. In the absence of this signalling data (as can often be the case) a de-
fault format must be used. This default format can be selected by the ZOOM AUTO function.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE menu (accessed via the FEA-
TURES menu).
All menus are removed within 60 seconds if you don t press any button. Press the remote
control MENU button (A19) to
display the main menu. Then,
you have the choice between
several sub-menus: If you want
to Exit the main menu, press
the MENU button (A19) a sec-
ond time.
- To select one of the sub-menus, use the remote control
CURSOR UP (A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control OK button (A18).
Remark: In AV/S-VIDEO mode, the INSTALL menu is not available and will not be selectable.
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Select the
- The remote
desired Position
by using the
remote control
CURSOR UP
(A6) or DOWN
(A21) buttons.
Main Menu
How to use the sub-menus
- Adjust the function using :
- The remote
control CURSOR
control
LEFT (A7) or
NUMBER 0...9
RIGHT (A20)
buttons (A3) to
buttons if you
enter directly
want to modify
new data.
the function
value.
MAIN MENU
PICTURE
SOUND
INSTALL
FEATURES
Position
Exit
- Store (if
needed) by
pressing the
remote control
OK button
(A18).
20
Access
- Then Exit to
main menu by
pressing the
MENU button
(A19).