Daewoo DLP-20J1 Instruction Manual
Daewoo electronics lcd flat panel tv instruction manual dlp-20j1, dlp-20d7, dlp-20w2
Hide thumbs
Also See for DLP-20J1:
- Instruction manual (31 pages) ,
- Service manual (51 pages) ,
- Service manual (12 pages)
Related Manuals for Daewoo DLP-20J1
Summary of Contents for Daewoo DLP-20J1
-
Page 1: Instruction Manual
LCD TELEVISION INSTRUCTION MANUAL DLP-20J1 DLP-20D7 DLP-20W2 PAL B/G, D/K, I/I, SECAM B/G, D/K, L/L’ , NTSC(AV) TELETEXT SCART/VIDEO/S-VIDEO MULTI-LANGUAGE OSD Helpline Number: 0870 100 2525... - Page 2 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to consti- tute a risk electric shock.
- Page 3 TV dealer or local power company. 8. PIXEL AND FIXED IMAGE The LCD panel is a very high technology product with 921,600 (DLP-20J1, DLP-20D7); 3,147,264 (DLP-20W2) thin film transistors which give you fine picture details.
-
Page 4: Table Of Contents
Contents Important Safeguards............5 Supplied Accessories. -
Page 5: Important Safeguards
Heat, Moisture, Dust, Vibration Position your set so that bright light or sunlight doesn’t fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. -
Page 6: Supplied Accessories
Supplied Accessories Make sure that the following accessories are provided with the product. Remote controller Instruction manual Batteries (Option) (2 x 1,5V, AAA) -
Page 7: Functional Overview
TV mode POWER A2 SOUND MUTE A3 NUMBER 0..9 A4 SLEEP A5 TV / AV A6 PROGRAM UP (CURSOR UP) VOLUME DOWN (CURSOR LEFT) A10 . SKIP MOVE 3D(SOUND EFFECT) MODE ZOOM RECALL NORMAL OK/PRESET/HEAD- PHONE VOLUME MENU VOLUME UP (CURSOR RIGHT) PROGRAM DOWN (CURSOR DOWN) -
Page 8: Local Control
Front DLP-20D7 DLP-20J1 DLP-20W2 Local Control Remote Sensor (B5) LED Indicator (B6) Remote Sensor (B5) LED Indicator (B6) Power Remote Sensor On/Off (B5) (B1) LED Indicator (B6) AV (B4) Volume Up/Down (B3) PR Up/Down (B2) Power On/Off (B1) AV (B4) - Page 9 Rear DLP-20D7 (C1) (C2) Aerial jack SCART socket DLP-20W2 DLP-20J1 (C3) (C4) (C5) Audio Input Video Input S-Video (L+R) Socket Socket jack (C5) S-Video jack (C4) Video Input Socket (C3) Audio Input (L+R) Socket (C2) SCART socket (C1) Aerial jack...
-
Page 10: Preparation
Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5v, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. -
Page 11: Aerial Connection
Preparation Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. DLP-20D7 Aerial DLP-20J1 Aerial terminal DLP-20W2 Aerial cable... - Page 12 NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR channel on programme number “ZERO”using the “Manual tuning” function (See page 23). Now you can watch the VCR in TV mode by selecting the programme number “PR00” . DLP-20D7 Aerial terminal RF OUT RF IN DLP-20W2 RF cable. DLP-20J1...
-
Page 13: Connecting External Equipment
Preparation Connecting external equipment DLP-20D7 DLP-20J1 DLP-20W2 Scart cable Headphone RCA cable S-video cable Set Top Box Set Top Box VCR/DVD VCR/DVD/Camcorder/ Video Game... - Page 14 Preparation TV/AV MODE SELECTION Press the TV/AV( ) button on the control panel repeatedly to select the source. You can also select the source using TV/AV( ) button on the remote controller. S-VIDEO In TV mode, you can change the TV programme number with the UP/DOWN button or the NUMBER button.
-
Page 15: Start Up
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later section under MENU DE- SCRIPTION). -
Page 16: Daily Use
Daily Use 1) If stand-by indicator (B6) is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/ DOWN buttons (B2) can also be used. -
Page 17: Program Selection (From 0 To 99)
Program Selection (From 0 to 99) Direct selection Use the remote control NUMBER 0…9 buttons (A3). For two digits program numbers, enter the second digit within 2 seconds. Up / Down selection Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B2). -
Page 18: Picture Control
Daily Use Sound effects A SPATIAL sound effect is available, using the remote control 3D (A13) button. The following display appears: To return to initial sound effect, press again the 3D (A13) button. The following display appears: As an option, the sound effects PANORAMA and Dolby Virtual are available with the same button. -
Page 19: Wake Up, Noise Reduction
ZOOM button (A15): Television Format The following picture formats are available: AUTO WIDE ZOOM FULL SCREEN WATERGLASS AUTO (DLP-20J1, DLP-20D7) AUTO FULL SCREEN ZOOM 14:9 TITLE-IN 14:9 ZOOM 16:9 TITLE-IN 16:9 AUTO (DLP-20W2) Remark: If HD source is received, picture format will automatically set to AUTO.(above vari-... -
Page 20: Menus Description
Menus Description ded in the transmission. In the absence of this signalling data (as can often be the case) a de- fault format must be used. This default format can be selected by the ZOOM AUTO function. LANGUAGE This can be changed at any time by the user in the LANGUAGE menu (accessed via the FEA- TURES menu). -
Page 21: Picture Menu
(For operating instructions, see page 20, HOW TO USE THE SUB-MENUS) - Select and adjust the level of each function : BACK- LIGHT, BRIGHTNESS, CONTRAST, COLOUR, SHARP- NESS, TINT (if available). - The above modified values are automatically stored in FAVOURITE mode. - NOISE REDUCTION feature can be activated or not. -
Page 22: Equalizer Menu
Menus Description - Select the equalizer band by use of the CURSOR LEFT (A7) or RIGHT (A20) buttons. - Adjust the level of each of the 5 equalizer bands, 100Hz, 300Hz, 1000Hz, 3000Hz, 8000Hz, by use of the CURSOR UP (A6) and DOWN (A21) buttons. - The above modified values are automatically stored in FAVOURITE mode. -
Page 23: Edit Menu
This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below. Program number Station name Channel number To enter the EDIT menu: From Install menu, select “Edit” , and press the OK button (A18): the EDIT menu appears. - Page 24 Channel searching - Select the “Frequency” function. - Press, and hold for more than 1second, the remote control CURSOR RIGHT (A20) LEFT (A7) buttons to start up [down] manual tuning. - Searching will stop automatically at the next channel found (to stop tuning, press the re- mote control MENU button (A19).
-
Page 25: Features Menu
See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 20, HOW TO USE THE SUB-MENUS) 1. When switched to ON: Prevents the use of the TV set with- out remote control 2. -
Page 26: Teletext
Teletext ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. - Teletext And Teletext (TAT) function (OPTION): if you want to watch two teletext pages on same screen, press the TELETEXT ( again. -
Page 27: Teletext Format Picture & Sound Control
SUBPAGE ( ) button (A10): - Press the SUBPAGE button (A10). In the extreme top left corner, instead of the page number, ‘’S..’’ will be displayed. This is ready to accept the sub- page number. - Enter directly the subpage number you want with the remote control NUMBER 0..9 buttons (A3): for example to request the 2nd subpage, type 0002. - Page 28 Volume and brightness control in teletext mode VOLUME (and sound MUTE), BRIGHTNESS controls are all possible in teletext. The BRIGHTNESS control are dedicated to the teletext display. - Access the VOLUME control by pressing the MENU button (A19) in teletext mode. A barograph will appear in the lower part of the screen (as in TV mode).
-
Page 29: Wall/Arm Mounting
Attaching a Wall or Arm mounting device This TV supports the VESA mounting standard and will ac- commodate various VESA mounting devices. To install any VESA mounting device, please follow the man- ufacturer’s instructions. 1. Remove all cables connected to the TV. 2. -
Page 30: Troubleshooting
Troubleshooting Please check the following items before calling for the repair services. Problem TV set Control/System lock up Remote control does not work. Local buttons do not work. No picture and no sound. No picture. No colour Picture is too light or too dark. -
Page 31: Specifications
VHF-H : S8 ~ S36 (154.25MHz ~ 423.25MHz) UHF : S37 ~ E69 (431.25MHz ~ 855.25MHz) The specification shown above may be changed without prior notice for quality improvement (Weight and Dimensions shown are approximate). Specifications DLP-20J1 DLP-20D7 20” TFT LCD 510.54mm(diagonal) 16.7M 700:1 0.6375(H) x 0.6375(V)