Datascope System 98 Service Manual page 222

4.9.2 Display Internal Statistics
This screen shows the following system information:
e Pump cycle count (number of times the [AB has been inflated)
e Accumulated assist time (time in hours:minutes that the system has been in
ASSIST Mode)
e Battery statistics:
- Last 3 start of discharge times
- Last 3 end of discharge times
- Last 3 full charge or top off times
This screen allows the internal statistics to be cleared by pressing the REF. LINE
key twice. This should only be done if the non-volatile Ram has been corrupted
or the Main board has been replaced.
4.9.3 Display Software Revision
Display Software Revisions of System 98.
4.10 REMOTE DIAGNOSTIC CONTROL
For Future Use.
4-32 System 98 Service Manual
Chapter 4, Repair Information