Datascope System 98 Service Manual page 105

1.3.23 SYSTEM CONFIGURATION
1. To enter the System Configuration mode press and hold the PREFERENCE
MENU key (27) while turning the IABP ON/OFF switch (77) to ON.
NOTE: the key must be pressed until the System Configuration screen appears.
i ; WARNING: System Configuration . System Configuration
Language Selection
Date Format Selection
| Modem Selection |
| Display Software Revision |
50/60 Hertz Filter Selection '
AY to highlight item (SELECT item DONE (DONE Exit
1.3.23.1 Language Selection
1. To enter the Language Selection menu item, press the UP & DOWN ARROW
keys (24) to highlight Language Selection.
2. Press the CHANGE/SELECT key (25) to open the Language Selection menu
item.
NOTE: The list of languages will always be shown in the native language while
all other text will be in the selected language.
i j WARNING: System Configuration
System Configuration mode is not for clinical use!
| Language Selection |
Current Selection -> ERIE |
Deutsch
Français |
Espanol
， Japanese
| Italiano
Portugués
| to highlight item (CHANGE) setting (DONE) Main Menu
Figure 1-69
System
Configuration
Figure 1-70
Language
Selection
System 98 Service Manual
Chapter 1, Operation
1-101