iFIT PRO-FORM SPORT User Manual page 8

3. Identify the Right Upright (50), and have a sec-
ond person hold it near the treadmill.
See the inset drawing. Locate the wire tie (C)
in the Right Upright (50). Tie the wire tie through
the wire pull (D) on the Upright Wire (58). Then,
insert the wire pull and the Upright Wire into the
Right Upright.
Then, pull the upper end of the wire tie (C) until
the Upright Wire (58) is routed through the Right
Upright (50). Do not untie the wire tie yet.
4. Do not pinch the Upright Wire (58) during this
step.
Attach the Right Upright (50) to the treadmill with
two M10 x 25mm Screws (3), an M10 x 65mm
Screw (1), and three M10 Star Washers (5); do
not fully tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way. Note: There is not a wire on the left
side.
3
58
4
8
C
50
50
C
58 D
50
58
5
5
3
3
1