Page 1
Serial Number Decal Member Care For service at any time, go to my.iFIT.com or scan the QR code below. PLEASE DO NOT CONTACT THE STORE. CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this...
This decal is on both sides. PROFORM and IFIT are registered trademarks of iFIT Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google LLC. The Bluetooth word mark ®...
To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the treadmill before using the treadmill. iFIT assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
19. Read, understand, and test the emergency page 7). You must be able to safely lift 45 lbs. stop procedure before using the treadmill (20 kg) to move the treadmill. (see HOW TO TURN ON THE CONSOLE on page 13). Always wear the clip while using 26.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM SPORT reading this manual, please see the front cover of this ® treadmill. The SPORT treadmill offers a selection of manual. To help us assist you, note the product model features designed to make your workouts at home number and serial number before contacting us (see more effective.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •...
Page 8
3. Identify the Right Upright (50), and have a sec- ond person hold it near the treadmill. See the inset drawing. Locate the wire tie (C) in the Right Upright (50). Tie the wire tie through the wire pull (D) on the Upright Wire (58). Then, insert the wire pull and the Upright Wire into the Right Upright.
Page 9
5. Do not pinch the Upright Wire (58) during this step. Set the console assembly (E) on the Right and Left Uprights (50, 56). Attach the console assembly (E) with four M6 x 12mm Screws (6), four M6 Star Washers (14), and two M4 x 16mm Screws (4);...
Page 10
7. See the inset drawing. Grip the connector on the Upright Wire (58) in the Right Upright (50). Then, press the small latch (F) on the wire pull (D), and remove and discard the wire pull and the wire tie (C). Next, insert the Upright Wire (58) through the two indicated Wire Ties (64), and connect the Upright Wire to the console wire (G).
HOW TO PLUG IN THE POWER CORD USE A SURGE SUPPRESSOR overloading the circuit, do not plug other electrical devices, except for low-power devices such as cell Your treadmill, like other electronic equipment, can be phone chargers, into the surge suppressor or into damaged by sudden voltage changes in your home’s an outlet on the same circuit.
To turn on and turn off the console, see page 13. To ETPF38825 use the manual mode, see page 14. To use an iFIT The console also features wireless technology that workout, see page 16. To change console settings, enables the console to connect to iFIT .
Page 13
HOW TO TURN ON THE CONSOLE displayed in a store. If the display lights as soon as you plug in the power cord and press the power ETPF38825 IMPORTANT: If the treadmill has been exposed to switch into the reset position, the demo mode is cold temperatures, allow it to warm to room tem- turned on.
Page 14
HOW TO USE THE MANUAL MODE 6. Follow your progress. The display can show the following workout 1. Insert the key into the console. information: See HOW TO TURN ON THE CONSOLE on page 13. Calories (CALS)—The approximate number of calories you have burned.
Page 15
Next, press the +/- button (G) to add or remove that Scan mode—The console also has workout information from the scan cycle. When a scan mode that workout information is added, its indicator will will display workout turn on in the display. When workout information information in a is removed, its indicator will turn off.
Page 16
4. Select an iFIT workout. The console offers access to a large and varied library In the iFIT app, touch the buttons at the bottom of of iFIT workouts when you download the iFIT app to the screen to select either the home screen (Home your smart device and connect it to the console.
Page 17
Stop button repeatedly to select the desired console. settings screen. To disconnect your smart device from the console, select the disconnect option in the iFIT app. 3. Change settings as desired. Note: All Bluetooth connections between the Unit of Measurement—The currently selected unit console and other devices (including any smart of measurement may appear in the display.
Page 18
Incline System Calibration—The letters CAL will Total Time—The word TIME will appear in the appear in the display. If the incline system is not display. The display will show the total number of functioning properly, it may need to be calibrated. hours that the treadmill has been used.
Page 19
HOW TO USE THE CHARGING PORT To connect your Bluetooth Smart heart rate moni- tor to the console, press the iFIT Sync button on the The console features a charging port to charge USB-C console; the console pairing number will appear in the compatible devices, such as smartphones and tablets, display.
FCC INFORMATION This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Remove the key from the console, and then and follow the steps listed. reinsert it. For further assistance, go to my.iFIT.com, scan d. If the treadmill still will not run, please see the QR code at the right, TROUBLESHOOTING at the left for further or call 1-833-680-IFIT assistance.
Page 22
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center a. Use only a surge suppressor that meets all of the a. First, remove the key and UNPLUG THE POWER specifications described on page 11. CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw b.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
Page 24
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
PART LIST Model No. PFTL38825.0 R0724A Key No. Qty. Description Key No. Qty. Description M10 x 65mm Screw Drive Motor U-bracket Motor Bracket M10 x 25mm Screw Controller M4 x 16mm Screw Electronics Bracket M10 Star Washer Cable Tie M6 x 12mm Screw Frame M8 x 80mm Screw Right Foot...
This warranty extends only to the original purchaser (customer) and is not transferrable. iFIT’s obligation under this warranty is limited to repairing or replacing, at iFIT’s discretion, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by iFIT.
Need help?
Do you have a question about the PRO-FORM SPORT and is the answer not in the manual?
Questions and answers