Page 1
To register your product and activate your warranty today, go to my.proform.com. MEMBER CARE For service at any time, go to my.iFIT.com or scan the QR code. Please do not contact the store. CAUTION Read all precautions and instructions in this manual before using this equipment.
Page 2
PROFORM and IFIT are registered trademarks of iFIT Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google LLC. The Bluetooth word mark ®...
Page 3
To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. iFIT assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
19. Read, understand, and test the emergency 26. When folding or moving the treadmill, make stop procedure before using the treadmill sure that the storage latch is holding the (see HOW TO TURN ON THE CONSOLE on frame securely in the storage position. Do page 16).
Page 6
BEFORE YOU BEGIN Thank you for selecting the new PROFORM reading this manual, please see the front cover of this ® CARBON TL treadmill. The CARBON TL treadmill manual. To help us assist you, note the product model provides an impressive selection of features designed number and serial number before contacting us.
Page 7
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
Page 8
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Left parts are marked “L” or “Left” and right parts packing materials. Do not dispose of the packing are marked “R”...
Page 9
3. Locate the Upright Wire (74) on the right side of the Upright Base (81). Remove the wire tie (not shown) securing the Upright Wire to the Upright Base as shown. Next, identify the Right Upright (73), and have a second person hold it near the Upright Base (81).
Page 10
5. Do not pinch the ground wire (31) during this step. Locate the small tab (E) on the Crossbar (69). Hold the Crossbar between the Uprights (72, 73), with the tab in the slot (F) in the Left Upright. Attach the Crossbar (69) with four 5/16" x 3/4" Screws (2) and four 5/16"...
Page 11
7. Make sure that the Ground Wire (31) is in front of the Crossbar (69) as shown. Do not pinch the Ground Wire during this step. Set the Console Base (84) on the Uprights (72, 73). Attach the Console Base (84) with the four 5/16"...
Page 12
9. Route the Upright Wire (74) and the ground wire (31) through the two Plastic Ties (88). Next, connect the Upright Wire (74) to the console wire (G). IMPORTANT: The wire con- nectors should slide together easily and snap into place with an audible click. If they do not, turn one connector and try again.
Page 13
Console (83). Note: If you do not have a smartphone or tablet, use your computer to go to iFIT.com/activate for an alternate way to activate the Console (83). If you do not have a computer, please see the Member Care contact information on page 24.
Page 14
HOW TO PLUG IN THE POWER CORD USE A SURGE SUPPRESSOR overloading the circuit, do not plug other electrical devices, except for low-power devices such as cell Your treadmill, like other electronic equipment, can be phone chargers, into the surge suppressor or into damaged by sudden voltage changes in your home’s an outlet on the same circuit.
Page 15
To turn on and turn off the console, see page 16. To console will display continuous exercise feedback. use the manual mode, see page 17. To use an iFIT workout, see page 19. To change console settings, You can even monitor your heart rate when you use a see page 20.
Page 16
HOW TO TURN ON THE CONSOLE switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down IMPORTANT: If the treadmill has been exposed to the Stop button for a few seconds. If the display cold temperatures, allow it to warm to room tem- remains lit, see HOW TO CHANGE CONSOLE perature before you turn on the console.
Page 17
HOW TO USE THE MANUAL MODE 5. Change the incline as desired. You can change the incline of the treadmill in the 1. Insert the key into the console. following ways: See HOW TO TURN ON THE CONSOLE on page 16. Incline increase and decrease buttons—Each time you press a button, the incline will gradually change until it reaches the selected incline setting.
Page 18
Press the Display Next, press the +/- button (G) to add or remove that button (D) repeat- workout information from the scan cycle. When edly to view the workout information is added, its indicator will desired workout turn on in the display. When workout information information in the is removed, its indicator will turn off.
Page 19
4. Select an iFIT workout. The console offers access to a large and varied library In the iFIT app, touch the buttons at the bottom of of iFIT workouts when you download the iFIT app to the screen to select either the home screen (Home your smart device and connect it to the console.
Page 20
To disconnect your smart device from the console, first select the disconnect option in the iFIT app. 3. Change settings as desired. Then, press and hold the iFIT Sync button on the console until the LED on the console turns solid Unit of Measurement—The currently selected unit green.
Page 21
Incline System Calibration—The letters CAL will Total Time—The word TIME will appear in the appear in the display. If the incline system is not display. The display will show the total number of functioning properly, it may need to be calibrated. hours that the treadmill has been used.
Page 22
Adjust the volume To connect your Bluetooth Smart heart rate moni- tor to the console, press the iFIT Sync button on the level using the Vol increase console; the console pairing number will appear in the and decrease buttons on the display.
Page 23
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before moving the treadmill, fold it as described at the Before folding the treadmill, adjust the incline of left. CAUTION: Make sure that the latch pin (D) is the treadmill to 0% to avoid damaging the treadmill.
Page 24
If further minutes, and then plug it back in. assistance is needed, go to my.iFIT.com, scan c. Remove the key from the console, and then the QR code at the right, reinsert it.
Page 25
SYMPTOM: The incline of the treadmill does not SYMPTOM: The walking belt is off-center change correctly a. First, remove the key and UNPLUG THE POWER a. See HOW TO CHANGE CONSOLE SETTINGS on CORD. If the walking belt has shifted to the left, page 20 to calibrate the incline system.
Page 26
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
Page 27
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
Page 28
PART LIST Model No. PFTL59724.2 R0523A Key No. Qty. Description Key No. Qty. Description Key/Clip Plastic Tie 5/16" x 3/4" Screw Right Tray 3/8" x 1 1/4" Screw Drive Roller/Pulley 3/8" x 2 3/8" Screw Frame 3/8" Star Washer Right Rear Foot 5/16"...
Page 29
EXPLODED DRAWING A Model No. PFTL59724.2 R0523A...
Page 30
EXPLODED DRAWING B Model No. PFTL59724.2 R0523A...
Page 31
EXPLODED DRAWING C Model No. PFTL59724.2 R0523A...
Page 32
This warranty extends only to the original purchaser (customer) and is not transferrable. iFIT’s obligation under this warranty is limited to repairing or replacing, at iFIT’s discretion, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by iFIT.
Need help?
Do you have a question about the PRO-FORM CARBON TL and is the answer not in the manual?
Questions and answers
Walking Belt not centered at front roller. How to center Walking Belt.
What kind of lubricant should I use for the CARBON TL ProForm treadmill belt? Model #PFTL59724.2
My treadmill not working because of panel . I can’t make it to work See picture of panel attached.