Download Print this page
iFIT NordicTrack COMMERCIAL 2450 User Manual

iFIT NordicTrack COMMERCIAL 2450 User Manual

Hide thumbs Also See for NordicTrack COMMERCIAL 2450:

Advertisement

Quick Links

nordictrack.com
Model No. NTL19125.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
MEMBER CARE
For service at any time, go to
my.iFIT.com or scan the QR
code below. PLEASE DO NOT
CONTACT THE STORE.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
USER'S MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the NordicTrack COMMERCIAL 2450 and is the answer not in the manual?

Questions and answers

Doug Morton
April 30, 2025

I recently purchased a NordicTrack 2450 treadmill. I have a question regarding the numbered speed buttons on the screen. Mine start at 1 and increase up to 9 before jumping to 14. It would be nice to change those set numbers. I do most of my workouts in the 8-12mph range. Since mine only goes up to 9, I have to manually hold down the button to increase or decrease the speed. Is there a way to change the speed buttons to higher amounts. I'd be happy to remove 1,2,3 etc....so I could have 10, 11, and 12.

Summary of Contents for iFIT NordicTrack COMMERCIAL 2450

  • Page 1 Write the serial number in the space above for reference. Serial Number Decal MEMBER CARE For service at any time, go to my.iFIT.com or scan the QR code below. PLEASE DO NOT CONTACT THE STORE. CAUTION Read all precautions and instructions in this manual before using this equipment.
  • Page 2 Apply the decal in the location shown. Note: The decals may not be shown at actual size. NORDICTRACK and IFIT are registered trademarks of iFIT Inc. The Bluetooth word mark and logos are regis- ® tered trademarks of Bluetooth SIG, Inc. and are used under license. Google Maps is a trademark of Google LLC.
  • Page 3 To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. iFIT assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
  • Page 4 19. Read, understand, and test the emergency 26. When folding or moving the treadmill, make stop procedure before using the treadmill sure that the storage latch is holding the (see HOW TO TURN ON THE CONSOLE on frame securely in the storage position. Do page 18).
  • Page 5 BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK reading this manual, please see the front cover of this ® COMMERCIAL 2450 treadmill. The COMMERCIAL manual. To help us assist you, note the product model 2450 treadmill provides a large selection of features number and serial number before contacting us (see designed to make your workouts at home more effec- the front cover of this manual).
  • Page 6 PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each part is the key number of the part, from the PART LIST near the end of this manual. The number after the key number is the quantity required for assembly.
  • Page 7 ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •...
  • Page 8 2. Make sure that the power cord is unplugged. Remove any ties securing the Upright Wire (92) to the right side of the Base (101). Next, identify the Right Upright (94), and have a second person hold it near the Base (101). See the inset drawing.
  • Page 9 4. Have a second person hold the Right Upright (94) on the Base (101). Insert two 3/8" x 3/4" Screws (1) with two 3/8" Star Washers (8) into the top of the bracket on the Right Upright (94), and partially tighten the Screws into the Base (101);...
  • Page 10 6. See the inset drawing. Press the small latch (H) on the connector on the Upright Wire (92), and remove and discard the wire pull (B). Then, cut and discard the plastic tie (Q) securing the Handrail Wire (91). Next, connect the Upright Wire (92) to the Handrail Wire (91).
  • Page 11 8. Remove the tag (not shown) from the Pivot Plate (75) on the console assembly (F). Next, have a second person hold the console assembly (F) near the handrail assembly (E). See the inset drawing. Make sure that the con- sole assembly is oriented so that the indicated hole (H) is aligned with the locator pin (I).
  • Page 12 10. Rotate the console assembly (F) back to its original position. Firmly tighten the two 5/16" x 3/4" Screws (6) that you attached in step 8. Then, attach the Right Pivot Cover (116) to the Pivot Plate (75) with an M4 x 16mm Screw (4); do not overtighten the Screw.
  • Page 13 12. Raise the Frame (66) to the position shown. IMPORTANT: Have a second person hold the Frame until step 14 is completed. See the inset drawing. Remove the two 5/16" x 1" Screws (9) from the Latch Crossbar (62). Then, orient the Latch Crossbar (62) as shown, with the “This side toward belt”...
  • Page 14 14. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (11) from the Latch Crossbar (62). Next, align the Storage Latch (65) with the bracket on the Latch Crossbar (62), and insert the 5/16" x 2 1/4" Bolt (11) through the bracket and the Storage Latch.
  • Page 15 16. Identify the Right Base Cover (98). Slide the Right Base Cover under the Upright Wire (92) and onto the Base (101). Make sure that the Right Base Cover is under the Upright Wire. Repeat this step on the left side of the tread- mill with the Left Base Cover (not shown).
  • Page 16 HOW TO PLUG IN THE POWER CORD USE A SURGE SUPPRESSOR overloading the circuit, do not plug other electrical devices, except for low-power devices such as cell Your treadmill, like other electronic equipment, can be phone chargers, into the surge suppressor or into damaged by sudden voltage changes in your home’s an outlet on the same circuit.
  • Page 17 Take time to explore through immersive exercise sessions.
  • Page 18 HOW TO TURN ON THE CONSOLE HOW TO TURN OFF THE CONSOLE When you finish using the treadmill, remove the key IMPORTANT: If the treadmill has been exposed from the console and put it in a secure place. Then, to cold temperatures, allow it to warm to room press the power switch into the off position and unplug temperature before you turn on the console.
  • Page 19 3. Create or sign in to your iFIT account. Follow the prompts on the screen to create an iFIT To use the fan, your Bluetooth headphones, or an account or to log in to your iFIT account. Available optional heart rate monitor, see page 25.
  • Page 20 (heart symbol). Note: You must be logged summary will appear. Touch the back arrow button in to your iFIT account to save a featured workout in the upper-left corner of the screen to return to (see step 2 on page 22).
  • Page 21 To create and use a custom workout, you must be of the route and a marker indicating your progress. logged in to your iFIT account and the console must be Touch the buttons on the screen to select the connected to a wireless network.
  • Page 22 4. Schedule an iFIT workout on the calendar if desired. To use an iFIT workout, you must be logged in to your iFIT account and the console must be connected to a To schedule an iFIT workout for a future date, sim- wireless network.
  • Page 23 • Time zone described in this manual may no longer apply to • Language your console, and your console may have new set- • iFIT AI Coach tings and features. Workout 5. Calibrate the incline system. • ActivePulse To calibrate the incline system, touch Equipment, •...
  • Page 24 If you have problems connecting to an encrypted network, make sure that your password is correct. If you have questions after following these instructions, please go to my.iFIT.com for assistance. 3. Exit the console settings menu. To exit the console settings menu, touch the X in...
  • Page 25 HOW TO USE THE CHARGING PORT HOW TO CONNECT HEADPHONES The console features a charging port to charge USB-C To connect your Bluetooth headphones to the console, compatible devices, such as smartphones and tablets, first turn on your headphones, put them in pairing while you exercise.
  • Page 26 FCC INFORMATION This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 27 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before moving the treadmill, fold it as described at the To avoid damaging the treadmill, adjust the incline left. CAUTION: Make sure that the storage latch to 0% before you fold the treadmill.
  • Page 28 Make sure that the settings for your wireless net- filter. work are correct. b. After the power cord has been plugged in, make sure that the key is inserted into the console. c. If you still have questions, go to my.iFIT.com.
  • Page 29 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center a. Use only a surge suppressor that meets all of the a. First, remove the key and UNPLUG THE POWER specifications described on page 16. CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw b.
  • Page 30 SYMPTOM: The displays of the console do not SYMPTOM: The console does not stay in place function properly when it is tilted upward and downward a. If the console does not boot up properly, or a. Using a standard screwdriver, carefully pry the if the console freezes and does not respond, upper console cover (F) and then the lower console reset the console to the factory default settings.
  • Page 31 EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
  • Page 32 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
  • Page 33 NOTES...
  • Page 34 PART LIST Model No. NTL19125.0 R1124A Key No. Qty. Description Key No. Qty. Description 3/8" x 3/4" Screw Left Foot Rail M4 x 10mm Screw Right Foot Rail Ground Screw Belt Guide M4 x 16mm Screw Rubber Cushion 5/16" Star Washer Drive Roller 5/16"...
  • Page 35 Key No. Qty. Description Key No. Qty. Description Base Access Cover Large Saddle Bracket Control Base Wheel Primary Control Upper Display Cover Key/Clip Lower Display Cover Wire Tie Display Display Ground Wire Display Back Plate Left Handrail Cover Bracket Small Saddle Bracket Right Handrail Cover Bracket Pivot Cover Clip...
  • Page 36 EXPLODED DRAWING A Model No. NTL19125.0 R1124A...
  • Page 37 EXPLODED DRAWING B Model No. NTL19125.0 R1124A...
  • Page 38 EXPLODED DRAWING C Model No. NTL19125.0 R1124A...
  • Page 39 EXPLODED DRAWING D Model No. NTL19125.0 R1124A...
  • Page 40 (5) if the product is modified to alter functionality or capability without the written permission of iFIT, or (6) if the product is used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by iFIT.

This manual is also suitable for:

Ntl19125.0
Save PDF