Connecting Rgb Signals (Mini D-Sub); Connecting Dvi Signals - BenQ DV3750 User Manual

Connecting RGB Signals (Mini D-SUB)

1. Connect the analog video output of your PC
to the PC D-SUB terminal on the display
using a Mini D-SUB 15-pin cable.
2. Connect the audio output of your PC to the
display's PC AUDIO input terminal using an
appropriate cable.
1. If the input signal resolution is higher than
the default display resolution, the screen
may be unable to display image details
clearly.
2. You will need a converter to connect a
Macintosh computer video to the display
using a PC D-SUB 15-pin cable.
3. Certain PC models cannot be connected to
the display.
4. The computer in the illustration is shown
only for reference; your equipment may
vary.
5. Additional equipment shown in the
illustration is not provided.
6. Do not set the computer's horizontal and
vertical scanning frequencies less than or
greater than the frequency range of the
display. (refer to "Supported Modes" on
page 19)
7. If you require more information on how to
connect your equipment, please refer to
the manual for the piece of equipment you
wish to attach.

Connecting DVI Signals

1. Connect the digital video output of your PC
to the DVI terminal on the display using a
DVI-D cable.
2. Connect the audio output of your PC to the
display's DVI AUDIO L/R input terminals
using the AV cable or equivalent.
8 Setting up Your Display
Audio cable
Mini D-SUB cable
PC
Audio cable
DVI-D cable
DVD player
PC