Connection; Connecting Audio/Video Signals - BenQ RP652 User Manual

Connection

Connecting audio/video signals

Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull
the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1. Connect the VGA jack on the display to the VGA output jack on a computer using a
D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the PC AUDIO jack on the display
using a suitable audio cable.
3. To view images from this input, press the INPUT button on the remote control and
select VGA.
The audio cable is not supplied and should be purchased separately.
D-Sub (15-pin) cable
Computer
Connection
Audio cable
15