Connecting The Signal Cable; Connecting Through D-Sub Signal Connector - BenQ P211 User Manual

Connecting the Signal Cable

Your Benq P211 provides both D-SUB and BNC signal connectors. The D-SUB or
BNC signals can automatically be detected by its microprocessor.

Connecting through D-SUB signal connector

1)
Make sure that the system power is turned off.
2)
Connect the computer end of the D-SUB cable to the 15-pin output connector
on the video board of your computer.
3)
Connect the monitor end of the D-SUB cable to the D-SUB receptacle on the
back of the monitor.
Installing the Monitor
5