Connecting The Pc D-Sub Input - BenQ SD3742 Quick Start Manual

SD37_TW_EN.book Page 13 Thursday, June 19, 2008 3:20 PM

Connecting the PC D-Sub input

1. Connect the D-Sub video output of your PC to the PC D-SUB terminal on the
display using a mini D-Sub (15-pin) cable (not provided).
2. Connect the audio output of your PC to the display's PC AUDIO IN terminal
using an appropriate 3.5mm-diameter Mini-jack stereo audio cable (not
provided).
To view video image from this input, press
When you connect the display to a PC, you should adjust the resolution in the
display properties of the computer to closely match the native resolution of the
display (for example, 1920 × 1080 @ 60Hz).
See "Supported PC (D-Sub/DVI) input signal resolutions" on page 33
supported resolutions and
page 33 on how to set up PC video output. If necessary, update the driver of the PC
graphic adapter.
PC
INPUT and select
"Setting up appropriate output resolution on PC" on
Section 1: Quick Start Guide
Audio cable
Mini D-Sub cable
PC .
on other
13