BenQ DV3750 User Manual page 21

Freeze motion of screen
Freeze image (however, broad-
cast continues).
Adjust backlight inten-
Backlight
sity.
Set the Sleep timer to
Sleep Timer automatically turn off
the display.
Advanced Feature- Press OK to enter.
Aspect
Adjust image aspect
ratio.
Ratio
Select video signal input
Video
source for PIP/PBP
Input
function.
Use the and buttons
on the remote control or
the VOL and VOL
buttons on the display to
change selection.
Use the and buttons
on the remote control or
the VOL and VOL
buttons on the display to
change selection.
Use the and buttons
on the remote control or
the VOL and VOL
buttons on the display to
change selection.
Use the and buttons
on the remote control or
the VOL and VOL
buttons on the display to
change selection.
Use the and buttons
on the remote control or
the VOL and VOL
buttons on the display to
change selection.
• No
• Yes
• Dark
• Normal
• Bright
0, 30, 60, 90, 120, 150, 180 min-
utes
• Full Screen - Enlarge the
standard 4:3 video signal to 16:9
full screen video signal. When
the original input video source is
16:9 in ratio (e.g. DVD signal),
no change will occur.
• 4:3 Format - Display the
standard 4:3 video signal in the
center of the screen at the ratio
of 4:3. The screen does not
change, but black blocks appears
in the left and right sides of the
screen. When the input video
source is 16:9 in ratio,
deformation will occur on the
screen.
• Letterbox -Fill the entire 4:3
screen with a 4:3 video signal.
The redundant part on the
upper and bottom of the image
will be removed and the image
will extend vertically and
horizontally to fill the full
screen. When the input video
source is 16:9 in ratio (e.g. DVD
signal), no change will occur.
• Anamorphic - Fill the entire
screen with a 4:3 video signal.
Some deformations may be
identified on the edge of the
image. When the input video
source is 16:9 in ratio (e.g. DVD
signal), no change will occur.
• Real - Display the actual size of
the video source without
zooming.
AV1, AV1-S, AV2, AV2-S, AV3,
AV3-S
AV1-S, AV2-S or AV3-S will
appear only when the S-Video
input of AV-1, AV-2 or AV-3 is
connected.
On-Screen Display (OSD) Menu 15