Table of Contents
Advertisement
4.3
Configuration of the clock
Configuration of the clock:
"General" > "Clock", then make the corresponding setting.
Via (CONF +1) or (LOG -1) you selected the desired setting.
(ON/OFF) confirms and saves your setting.
(MEAS) terminates the entry dialog without transferring the value.
4.4
Configuration of the language
Configuration of the language:
"General" > "Language", then make the corresponding setting.
Via (CONF +1) or (LOG -1) you selected the desired setting.
(ON/OFF) confirms and saves your setting.
(MEAS) terminates the entry dialog without transferring the value.
4.5
Configuration of the switch-off time
You can set the time on the meter, after which the meter will be switched off automatically.
The data logger also records while the meter is off, if the data logger has been set up for this.
Configuration of the automatic switch-off time:
"General" > "Switch-off time", then enter the desired switch-off time.
Via (CONF +1) or (LOG -1) you selected the desired setting.
(ON/OFF) confirms and saves your setting.
(MEAS) terminates the entry dialog without transferring the value.
If the switch-off time = 0 was selected, the function is deactivated!
49
Advertisement
Table of Contents
Need help?
Do you have a question about the SI Analytics Lab 745 and is the answer not in the manual?
Questions and answers