Display; Password Protection - Xylem SI Analytics Lab 745 Operating Manual

3.3

Display

9
8
7
Fig. 4
1) Main measured value
2) Fixed temperature active
3) Temperature compensation
4) Temperature
5) Min. main measured values
6) Max. main measured values
7) Time
8) Date
9) Secondary measured value
3.4

Password protection

It´s possible to protect the menu items Calibration (CAL) and Configuration (CONF) by a password.
This password can be defined in the menu item (CONF) under "General" (also see  4.2)
The password to open the individual menus is deactivated when the device is delivered!
Passwort = 0 (status at time of delivery)
Passwort > 0 (password inquiry is active – the user is asked for a password))
The password can have up to 4 digits (1 - 9999).
Password configuration:
(CONF) > "General" > "Password"
Via (INFO) or (CAL) you select the position to change.
Via (CONF +1) or (LOG -1) you change the position.
(ON/OFF) confirms and saves your setting.
(MEAS) terminates the entry dialog without transferring the value.
(applies only to Lab 945)
enter and repeat password.
>
47
1
2
3
4
5
6