Icom IC-12GAT Instruction Manual page 7

PRE-OPERATION 3.
3-2 MODE FLOW CHART
VFO MODE MEMORY MODE
Simplex, duplex settings (p. 17)
- Memory channel selection (p.19)
- Memory Scan (p. 21)
- Memory Skip function (p. 21)
- Pocket beep (p. 22)
- Subaudible tone encoder ON/
OFF (p. 18)
Tone Squelch (p. 22)
- Transferring Memory contents
to the VFO (p. 20)
RIT operation (p. 15)
VXO operation (p. 15)
Frequency setting (p. 13)
- Memory writing (p. 19)
- Pocket beep (p. 22)
Programmed Scan (p. 20) |
- Simplex, duplex settings (p. 17)
- Subaudible tone encoder ON/
OFF (p. 18)
- Tone Squelch (p. 22)
- RIT operation (p. 15)
VXO operation (p. 15)
-
V/M
CALL
SET MODE CALL CHANNEL MODE
(IC-12GAT only)
- Offset frequency (p. 26)
- Power saver ON/OFF (p. 28)
- Scan edge (p. 27)
- Subaudible tone (p. 26)
- Tuning step (p. 27)
Programming (p. 23)
Operation (p. 23)