Icom IC-12GAT Instruction Manual page 30

9. SET MODE
9-4 TUNING STEP
Tuning step settings:
IC-12GAT: 10 or 20kHz
IC-12GE : 12.5 or 25kHz
9-5 PROGRAMMED
SCAN EDGE
Example:
Scan Edge
ANS =
1240.00MHz
The tuning step is the frequency change in kHz
effected by pushing [10k] once.
1) When using the VFO mode, push [V/M] while
pushing [FUNCTION].
2) Push [V/M] until "TS" flashes on the FUNC-
TION DISPLAY.
e To exchange 10 or 20kHz settings for 12.5 or
25kHz setting reset the CPU. See pgs. 29 ~ 30.
3) Push [10k] for the desired tuning step.
4) Push [WR] to return to the VFO mode; or
push [V/M] for the next SET display (p. 25).
Set the edge frequencies for a Programmed Scan.
1) When using the VFO mode, push [V/M] while
pushing [FUNCTION].
2) Push [V/M] until "A" appears on the FUNC-
TION DISPLAY.
3) Push the DIGIT UP/DOWN SWITCHES for the
desired frequency.
4) Push [V/M] until "b" appears on the FUNC-
TION DISPLAY.
5) Push [WR] to return to the VFO mode; or
push [V/M] for the next SET display (p. 25).
Scan Edge
Programmed Scan
1300.00MHz