Icom IC-12GAT Instruction Manual page 26

I9»,
8. RELATED FUNCTIONS
8-8 CALL CHANNEL
OPERATION
(IC-12GAT only)
ll READING
B WRITING
8-9 BEEP ON/OFF
The Call Channel is a separate Memory Channel
which provides easy access to your most often
used frequency.
1) Push [CALL] to bring up the Call Channel.
e "C" appears on the FUNCTION DISPLAY.
2) Push [CALL] again to return to the previous
operating frequency.
1) Push [V/M] or [CALL] until "M" or "C"
disappears from the FUNCTION DISPLAY.
2) Set the operating frequency, the tone frequency,
etc., as you would program a Memory Channel.
See p. 19.
3) Push [CALL].
e "C" appears on the FUNCTION DISPLAY.
4) To write the information into the Call Channel,
push and hold [WR] until the speaker emits 3
beeps.
The speaker emits a beep when a switch is pushed.
While pushing [FUNCTION], push [MONI] once
to turn OFF the beeps. Push again to turn ON the
beeps.
e Turning these beeps ON and OFF does not affect
Pocket Beep.