Icom IC-12GAT Instruction Manual page 6

| |
ME 2. PRE-OPERATION
3-1 MODE DIRECTORY
WB vro MODE The VFO is used for operating within the band
edges.
B MEMORY MODE A Memory Channel is used for operating on the
frequency written in it. Each channel also stores
all the information required to work a repeater.
NM SET MODE In SET mode, the user selects the tone frequency
(IC-12GAT only), the offset frequency, the tuning
step, the programmed scan band edges and the
power save function ON/OFF.
E CALL CHANNEL MODE The Call Channel is provided for one touch access
(IC-12GAT only) to an important or often used frequency.