Icom IC-12GAT Instruction Manual page 29

9-2 SUBAUDIBLE
TONE
(IC-12GAT only)
Initial tone frequency: 88.5Hz
9-3 OFFSET
FREQUENCY
Initial offset frequencies:
1C-12GAT: 12MHz
IC-12GE
: 35MHz
SET MODE 9.
Select one of 38 subaudible CTCSS tone encoded
frequencies for repeater operation; or 37 encoder/
decoder frequencies when the UT-40 TONE
SOUELCH UNIT (sold separately) is installed.
1) When using the VFO mode, push [V/M] while
pushing [FUNCTION].
2) Push [V/M] until "TO" flashes on the FUNC-
TION DISPLAY.
3) To select a tone frequency, push [10k].
4) Push [WR] to return to the VFO mode; or
push [V/M] for the next SET display (p. 25).
Select the offset frequency for repeater operation.
1) When using the VFO mode, push [V/M] while
pushing [FUNCTION].
2) Push [V/M] until "OF" flashes on the FUNC-
TION DISPLAY.
3) Push the DIGIT UP/DOWN SWITCHES for the
desired offset frequency.
Example: Repeater input frequency
1296.00MHz
Repeater output frequency
1284.00MHz
Set the offset frequency to "12.00."
4) Push [WR] to return to the VFO mode; or push
[V/M] for the next SET display (p. 25).