Icom IC-12GAT Instruction Manual page 24

8. RELATED FUNCTIONS -
8-5 MEMORY SCAN
8-6 MEMORY
CHANNEL SKIP
FUNCTION
The Memory Scan function scans all Memory
Channels in succession.
1) Push [V/M] until "M" appears on the FUNC-
TION DISPLAY.
2) Rotate [SQL] until the speaker is muted.
3) While pushing [FUNCTION], push [10k] up to
start an upwards scan; or push down to start a
downwards scan.
e The decimal point blinks.
eThe scan stops when a signal opens the
squelch.
e The scan waits on a signal for 15 seconds
before resuming.
e The scan resumes 2 seconds after a signal
disappears.
4) To stop the scan, push any switch on the top
panel.
Use this function to skip Memory Channels in a
Memory Scan.
1) Select the Memory Channel to be skipped. See
Section 8 - 1, steps 1 and 2.
2) To write the SKIP function into the Me-
mory Channel, push [V/M] while pushing
[FUNCTION]. |
e Repeat this step to cancel SKIP for that
channel.