Icom IC-12GAT Instruction Manual page 32

=e
EB | O. MAINTENANCE
10-1 MEMORY The life of the memory backup battery is more
BACKUP than 5 years. When this battery is exhausted, the
BATTERY transceiver operates normally. However, detaching
the battery pack erases the memory.
The backup battery should be replaced by an
authorized Icom Dealer or Service Center.
10-2 RESETTING Erroneous information displayed on the FUNC-
THE CPU TION DISPLAY is usually caused by static or a
magnetic field near the transceiver.
NOTE: Resetting the CPU erases all informa
tion written into the memory chan-
nels.
M BEFORE RESETTING Turn OFF the power, and then turn it ON again
after a few seconds.
If erroneous information is still displayed, reset
the CPU as described below.
ll iC-12GAT 1) While pushing [FUNCTION] and [LIGHT],
turn OFF the power.
2) Continue pushing [FUNCTION] and [LIGHT].
Turn ON the power.
[Ng Cup)
nct DA. "P
HH "n. c. i G ar e The entire display appears.
mE) EE E 9
e "95.00" appears after 2 seconds.
3) Stop pushing [FUNCTION] and [LIGHT].
e [he CPU has been reset.