General Features; Electrical Conection; Fitting The Feet; Care And Maintenance - Fagor RN-11 Instructions For Use Manual

interior 7/4/04 06:38

1. GENERAL FEATURES

Remove the appliance from the packaging,
turn upside down and rest on the
polystyrene. Check that neither the
appliance nor the power cable has been
damaged in any way during transportation.
Do not operate the appliance if damaged.

2. FITTING THE FEET

• Remove the feet and the castors from the
polystyrene packing.
• Fit the castors on the feet using the nuts.
(Fig 1)
• Fit the feet with the casters to the bottom
of the radiator using the two arc-shaped
threaded brackets and the butterfly nuts.
Fit only between the external elements as
shown in figures 2 and 3.
• Turn the heater to its upright position for
operation.
Página 4
EN
• Before plugging the radiator into the
• CONNECT YOUR HEATER TO EARTH
• The appliance complies with EEC
Switching on
Plug the radiator into the main socket. Turn
the thermostat to "MAX" position. Switch the
radiator on as follows:
• Button in position "1" = minimum power
• Button in position "2" = intermediate
• Both buttons in position "1" + "2" =
To turn the appliance off, switch off both
switches and remove the plug from the wall
socket.
Adjusting the thermostat
• When the room has reached the required
The heater requires regular cleaning to
ensure trouble free operation:
• Before carrying out any operation on the
5

3. ELECTRICAL CONECTION

mains, check that the voltage of your
mains electricity supply corresponds to
the value V indicated on the appliance
and that the socket and power line are
appropriately dimensioned.
PROVIDED SOCKET ONLY.
Directive 89/336, relating to electro-
magnetic compatibility.
4. HOW TO USE IT
(indicator light ON)
power (indicator light ON)
maximum power (indicators lights ON)
temperature, slowly turn the thermostat
back until the power light goes off (or to
the position marked by a click) and no
further. The set temperature will then be
regulated automatically and kept constant
by the thermostat.

5. CARE AND MAINTENANCE

radiator, unplug from the electric mains
and wait for it to cool.