HPE ProLiant MicroServer Gen11 Maintenance And Service Manual page 4

Removing and replacing a DIMM
Removing and replacing the fan
Heatsink replacement
Removing the heatsink
Installing the heatsink
Processor replacement
Processor cautions
Removing the processor
Installing the processor
Reconfiguring the system date and time settings
Removing and replacing an expansion card
Removing and replacing the iLO-M.2-serial module
Removing and replacing the serial port cable
System board replacement
Removing the system board
Installing the system board
Re-entering the server serial number and product ID
Removing and replacing the power distribution board
System battery replacement
System battery information
Removing and replacing the system battery
Cabling
Cabling guidelines
Cabling diagrams
Internal cabling management
Storage cabling
Four-bay drive cabling: Onboard SATA power and signal cabling
Four-bay drive cabling: Type-p storage controller converter cabling
Serial port cabling
Ambient temperature sensor cabling
Fan cabling
System power cabling
Troubleshooting
NMI functionality
Troubleshooting resources
Component identification
Front panel components
Front panel LEDs and button
Front panel LED power fault codes
Rear panel components
Display device setup