Defining Mstp Port Information - D-Link DGS-3100 User Manual

4. Click
5. Define the new value.
6. Click
updated.

Defining MSTP Port Information

Network Administrators can assign MSTP Interface settings in the MSTI Config Information Page. To define MSTP
interface settings:
1. Click L2 Features > Spanning Tree > MSTP Port Information. The MSTI Config Information Page opens:
The MSTI Config Information Page contains the following fields:
Field
Unit
Port
Instance ID
Internal Path Cost
Priority
Status
to an ID row to edit the ID value.
. The Multiple Spanning Tree Configuration Identification is defined, and the device is
Figure 3–17. MSTI Config Information Page
Description
Defines the unit to find.
Defines the Port to find.
Lists the MSTP instances configured on the device. Possible field range is 0-7.
Indicates the port contribution to the Spanning Tree instance. The range should always be 1-
200,000,000. The default value is automatically set cost, according to its speed. Default port
cost: 10Mbps port = 2000000, 100Mbps port = 200000. Gigabit port = 20000, Port-channel =
20000.
Defines the interface priority for the specified instance. The default value is 128.
Indicates whether the port is enabled for the specific instance. The possible field values are:
Forwarding — Enables the port for the specific instance.
Listening - Processes BPDUs received from the system module
Learning – Incorporates station location into its address database
Blocking - Discards frames received from the attached segment and frames switched from
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
80