D-Link DGS-3100 User Manual page 124

All algorithms are enabled by default. To enable SSH Algorithms:
1. Click Security > SSH > SSH Algorithm Settings. The SSH Algorithm Settings Page opens:
The SSH Algorithm Settings Page contains the following fields:
Field
Public key
Public Key Algorithm
Data Integrity Algorithm
Encryption Algorithm
2. Enable or disable the public key status in the Public key field.
3. Click
Figure 5-16. SSH Algorithm Settings Page
Description
Indicates Publickey SSH User Authentication enabled on the device. The possible field
values are:
Enabled — Enables Publickey SSH User Authentication on the device.
Disable — Disables Publickey SSH User Authentication on the device.
Disable is the default value.
Displays the currently enabled Public Key Algorithms.
Displays the currently enabled Data Integrity Algorithms.
Displays the currently enabled Encryption Algorithms.
. The Publickey SSH User Authentication setting is defined, and the device is updated.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
112