DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Config Firmware Image
TheConfig Firmware Image Config Firmware Image Page allows users to change each device's image file. To change the
reboot file:
1. Click Configuration > Dual Image Services > Config Firmware Image. The Config Firmware Image Config
Firmware Image Page opens:
TheConfig Firmware Image Config Firmware Image Page contains the following fields:
Field
Unit
Image
2. Select the Unit and choose its reboot Image file.
3. Click
53
Figure 2-21 Config Firmware Image Page
Description
Defines the stacking member for which the reboot image file is defined.
Defines the image file used for reboot. The possible values are:
•
1 – Image-1 is the latest downloaded image file.
•
2 – Image-2 is the previously downloaded image file.
. The device will use the defined image file the next time it reboots.