Field
Host Timeout
Router Timeout
State
Static Router Port Setting (Edit button)
Multicast Entry Table (View Button)
2. Click
The Static Router Ports Settings Page contains the following fields:
Field
VLAN ID
VLAN Name
Leave Timer
Description
16711450 seconds.
Defines the time the host waits to receive a message before timing out. The
default time is 260 seconds. The field range is 60-16711450 seconds.
Defines the time the Multicast router waits to receive a message before it
times out. The default value is 300 seconds. The field range is 1-16711450
seconds.
Indicates if IGMP snooping is enabled on the VLAN. The possible field
values are:
Enable — Enables IGMP Snooping on the VLAN.
Disable — Disables IGMP Snooping on the VLAN. (This is the default
value).
Displays the Static Router Ports Settings Page.
Displays the Multicast Entry Table.
. The Static Router Ports Settings Page opens:
Figure 3–12. Static Router Ports Settings Page
Description
Specifies the VLAN ID
Displays the user-defined VLAN name.
Defines the time a host waits to receive a Join message from another station after
requesting to leave the IGMP group, prior to timing out. If a Leave Timeout occurs,
the switch notifies the Multicast device to stop sending traffic The Leave Timeout
value is either user-defined, or an immediate leave value. The default timeout is 10
seconds. The field range is 0-16711450 seconds.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
70