Defining Bandwidth Settings - D-Link DGS-3100 User Manual

Defining Bandwidth Settings

The Bandwidth Control Page allows network managers to define the bandwidth settings for a specified ingress interface.
1. Click QoS > Bandwidth Control. The Bandwidth Control Page opens:
The Bandwidth Control Page contains the following fields:
Field
Unit
From Port
To Port
No Limit
Ingress Rate (3500-1000000)
2. Define the Unit, From Port, To Port, No Limit and Ingress Rate fields.
3. Click
Figure 4-2. Bandwidth Control Page
Description
Defines the stacking member for which the bandwidth parameters are displayed
Defines from which port number bandwidth settings are displayed.
Defines to which port number bandwidth settings are displayed.
Defines if bandwidth limitation is assigned to the port. The field value options
are:
Enabled — Ensures no bandwidth limitations on the port. (This is the default
value).
Disabled — Disables no bandwidth limitations on the port. When disabled,
user can enter a limit value in the ingress Rate field.
The possible field range is 3500 – 1000000.
. The bandwidth settings are defined, and the device is updated.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
88