Volvo CHARGING CABLE MODE 2 TYPE 2 CONNECTOR User Manual page 7

To stop charging an electric vehicle:
1. Press "unlock" on the key or press the
button on the EVI.
2. Disconnect the vehicle connector from the
electric vehicle.
3. Remove the AC plug from the AC socket-
outlet.
Changing the AC Plug
The AC plug of the charging cable can be
changed to adapt the electrical environment.
NOTE
• The adaptor plug is not a standard offer
depending on the applied regions.
• This instruction is only applicable to
Mode 2 charging cable - with adaptor
plug.
1. Disassemble the adapter plug: rotate the
adapter cap for loosening the plug.
CHARGING CABLE – MODE 2, TYPE 2 CONNECTOR
2. Assemble the adapter plug: align the mark
and insert the plug, the adapter cap will
rotate automatically.
NOTE
• Only the corresponding adaptor plug
can be plug into the charging cable
adaptor.
• Must not connect other device to the
charging cable adaptor.
• Must disconnect the AC plug from AC
socket-outlet when you change the
plug.
• Must not use the charging cable if the
align mark is not in the right position.
en-GB
7