Safety Information - Volvo CHARGING CABLE MODE 2 TYPE 2 CONNECTOR User Manual

CHARGING CABLE – MODE 2, TYPE 2 CONNECTOR

Safety Information

en-GB
Important safety instructions – save
these instructions
WARNING
A RISK OF FIRE OR ELECTRIC SHOCK
CAUTION: To reduce the risk of fire,
connect only to a circuit provided with
Type B / C 20A breaker for IEC 60309
Blue 1P16A, Type I, Type G, CEE 7/7 AC
input plug, and a circuit provided with Type
B / C / D 20A breaker for IEC 60309 Red
3P16A, and Type B/C/D 40A breaker for
IEC 60309 Blue 1P32A AC input plug.
The charging cable is intended only for
charging vehicles not requiring ventilation
during charging.
Read the safety information and instruction
carefully before you install and operate the
charging cable to avoid fire and injury.
• Read all the instructions before using this
product
• Always follow local electrical regulation
when using the charging cable.
• Always conduct a visual inspection to ensure
no physical damage to charge cable outlook.
Stop using it immediately and contact local
Customer Support if there is any damage.
4
• DO NOT use the charging cable with
damaged socket-outlet.
• DO NOT use this product if the flexible
power cord or EV cable is frayed, has
broken insulation, or any other signs of
damage.
• DO NOT use this product if the enclosure
or the EV connector is broken, cracked,
open, or shows any other indication of
damage.
• Children should be supervised when in the
vicinity of the charging cable, when the
charging cable is connected.
• DO NOT put your fingers into the
connector.
• DO NOT use the device at potentially
explosive atmosphere areas.
• DO NOT pull the charging cable while it is
in charging session.
• DO NOT use the charging cable with an
extension cord and the adapter of vehicle
connector.
• DO NOT make any unauthorized changes
or modifications to the charging cable.
• DO NOT remove any identifiers such as
safety symbols, warning instructions,
plates, labels or cable markings.
• Must disconnect the AC plug from AC
socket-outlet when using adapter plug.
• Repair work to charging cable shall only be
performed by the manufacturer.